Pioneer AVIC-F9210BT - Manual (Page 18)

Using
“AV2 Input” (AV2)
To audio outputs
Yellow
(VIDEO INPUT)
RCA connector
Red, white
(AUDIO INPUT)
RCA cables
(sold separately)
To video output
The navigation unit
External video
component
(sold separately)
20 cm (*1)
23 cm (*2)
(*1)
AVIC-F20BT
(*2)
AVIC-F920BT
! It is necessary to set “AV2 Input” in “AV
Settings
” to “Video” when connecting the
external video component. (For details,
refer to Operation Manual.)
When connecting the rear
display
The navigation unit
To video input
Rear display with
RCA input jacks
To audio inputs
Yellow
(REAR MONITOR
OUTPUT)
RCA connector
Red, white
(REAR MONITOR
OUTPUT)
RCA cables
(sold separately)
15 cm
RCA cables
(sold separately)
This connection
is available for
AVIC-F20BT.
When using a rear display
connected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This navigation system
’s rear video output is for
connection of a display to enable passengers in
the rear seats to watch the video source.
Engb
18
Section
03 Connecting the System