Pioneer X-HM51-S - Manual (Page 33)

Additional information 11
33
En
English
Français
Español
When an iPod/iPhone/iPad is connected
Power is not supplied to the
USB storage device.
Is AUTH ERROR displayed on the
front panel display? No power is
supplied if the power consumption is
too high.
Turn the power off then back on.
Turn the power off, then disconnect and reconnect the USB storage
device.
Press INPUT to switch to the other input, then switch again to the
USB
/iPod input.
Problem Check Remedy
Problem Remedy
Can’t operate the iPod/iPhone/iPad by the remote control. Make sure the iPod/iPhone/iPad is connected correctly (refer to
Connecting your iPod/iPhone/iPad on page 16).
Can’t operate the iPod/iPhone/iPad. Make sure the iPod/iPhone/iPad is connected correctly (refer to
Connecting your iPod/iPhone/iPad on page 16).
If the iPod/iPhone/iPad is experiencing a hangup, try resetting the
iPod/iPhone/iPad, and reconnect it to the unit.
;+0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸱ᖺ㸱᭶㸰㸶᪥ࠉᮌ᭙᪥ࠉ༗ᚋ㸰᫬㸯ศ