Pioneer AVIC-HD3 - Manual (Page 15)

13
Ch
ap
te
r 2
H
o
w
to
U
se
th
e N
av
ig
ati
on
S
ys
te
m
a
n
d
N
am
es
o
f t
h
e Pa
rt
s
❒ If you cannot insert a disc completely or if an
inserted disc is not recognised, check that the
label side of the disc is up. Press the EJECT
button to eject the disc, and check the disc for
damage before inserting the disc again.
❒ If the built-in DVD drive does not operate
properly, an error message may be displayed.
➲ Error messages ➞ Operation Manual
Ejecting a disc
1
Press the OPEN CLOSE button.
The LCD panel opens.
2
Press the EJECT button.
The disc is ejected.
3
Press the OPEN CLOSE button.
The LCD panel closes.
Adjusting the LCD Panel Angle
• When opening, closing and adjusting the
angle of the LCD panel, be careful not to
get your finger caught.
• Do not open and close the LCD panel with
hands by force. This may cause
malfunction.
1
Press and hold the OPEN CLOSE button.
The angle adjustment screen appears.
2
Touch [+] or [–] to adjust the angle.
Five levels of angle are available.
3
Touch [Back].
❒ The adjusted angle of the LCD panel will be
memorised and the LCD panel will
automatically return to that angle the next
time the LCD panel is opened or closed.
MAN-HD3-HARDW-EN.book Page 13 Thursday, January 25, 2007 10:14 AM