English – Pioneer PDP-S64 User Manual

Page 5

English

NOTE:

• Press the lever and insert the end of

the cable.

• When you release the lever, it clamps

onto the speaker cable.

Caution

• Be sure to turn the connected devices off and remove

the power cord from the wall outlet beforehand when
changing the connection or installation method.

• If you insert the speaker cable too far so

that the insulation is touching the speaker
terminal, you may not get any sound. Please
insert it with showing the copper wire.

• Check if the end of the speaker cables are

securely connected to the terminals by
slightly tugging on the cable after making
connections. Loose connections may result
in sound dropouts or noise.

• If there is a short in the  and  cables caused by an

exposed lead wire, excessive load may be applied to
the ﬂat screen TV, resulting in interrupted operation or
malfunction.

• Incorrect connections of the speaker cable to the right

or left of the ﬂat screen TV terminals with respect to the
polarity may result in insufﬁcient stereo sound effects,
delivering poor bass sounds or unstable sound image.

• Bundle the cable without pulling.

��
��

��

������

������

��

�����

����

��
��

��

��

��

��