Pioneer AVD-W6000 - Manual (Page 28)

Connection Diagram (VCR input)
27
Connecting the System
Display Unit
Note:
• This system has display mounting location [LOCATION] settings [FRONT/REAR]. Be sure to
complete these setting after the system has been installed. (Refer to page 19.)
• When other AV equipment is connected to the VCR1 or VCR2 input, setting may be required.
(Refer to page 17.)
• Even when an S-VIDEO signal is input to this unit, also input the RCA video signal (yellow) at
the same time; otherwise, video will not be output from the video output jack of this unit.
White
Commercially
available portable
video component
with RCA output
To AUDIO output
To VIDEO output
To S-VIDEO output
VCR1 INPUT
VCR2 INPUT
Hide-away Unit
S-VIDEO cable (sold separately)
3 m
VCR1 RCA audio input (white, red)
VCR1 RCA video input (yellow)
VCR1 S-VIDEO input (black)
Commercial RCA cable
(sold separately)