Pioneer VSX-423-S - Manual (Page 29)

5 5
29
Chapter
4
37
6
Listening to your system
Choosing the listening mode
This receiver offers a variety of listening modes to
accommodate playback of various audio formats. Choose one
according to your speaker environment or the source.

While listening to a source, press the listening mode
button repeatedly to select a listening mode you want.
• The listening mode is shown on the display on the front
panel.
Important
• The listening modes and many features described in this
section may not be available depending on the current
source, settings and status of the receiver.
Auto playback
The simplest, most direct listening option is the AUTO
SURROUND
feature. With this, the receiver automatically
detects what kind of source you’re playing and selects
multichannel or stereo playback as necessary.
• Press AUTO/DIRECT repeatedly until AUTO SURROUND
shows briefly in the display (it will then show the decoding
or playback format). Check the digital format indicators in
the display to see how the source is being processed.
Note
• Stereo surround (matrix) formats are decoded accordingly
using NEO:6 CINEMA (see Listening in surround sound
below for more on these decoding formats).
Listening in surround sound
Using this receiver, you can listen to any source in surround
sound. However, the options available will depend on your
speaker setup and the type of source you’re listening to.
• If the source is Dolby Digital, DTS, or Dolby Surround
encoded, the proper decoding format will automatically be
selected and shows in the display.
When you select STEREO ALC (Auto Level Control stereo
mode), this unit equalizes playback sound levels if each sound
level varies with the music source recorded in a portable
audio player.
When you select STEREO, you will hear the source through
just the front left and right speakers (and possibly your
subwoofer depending on your speaker settings). Dolby Digital
and DTS multichannel sources are downmixed to stereo.
The following modes provide basic surround sound for stereo
and multichannel sources.
Explanatory notes
No: No connected / Yes: Connected / Two: Two speakers are
connected / –: Whether connected or no
a. You can also adjust the C.WIDTH, DIMEN., and PNRM. effect
(see Setting the Audio options on page 31 ).
b. You can also adjust the C.IMG effect (see Setting the Audio
options on page 31 ).
c. • You can choose the STEREO mode by using STEREO button.
• The audio is heard with your surround settings and you can
still use the Midnight, Loudness, Phase Control, Sound
Retriever and Tone functions.
AUTO/
DIRECT
AUTO SURROUND/
STREAM DIRECT
ALC/
STANDARD
ALC/
STANDARD SURR
Type of surround modes Suitable sources
Two channel sources
STEREO ALC See above.
DOLBY PLII MOVIE Movie
DOLBY PLII MUSIC a Music
DOLBY PLII GAME Video games
NEO:6 CINEMA b Movie
NEO:6 MUSIC b Music
DOLBY PRO LOGIC Old movies
Straight Decode No additional effects
STEREO c See above.
Multichannel sources
STEREO ALC See above.
Straight Decode No additional effects
STEREO c See above.