beautypg.com

Resetting the main unit, Cleaning the unit – Pioneer VSX-828-K User Manual

Page 69

background image

Additional information

11

11

69

65

7

4

Resetting the main unit

Use this procedure to reset all the receiver’s settings to the

factory default. Use the front panel controls to do this.

For instructions on resetting the network connection

settings, see

Factory Reset on page 49

.

1

Switch the receiver into standby.

2

While holding down

BAND

, press and hold

STANDBY/ON

for about two seconds.

3

When you see RESET? appear in the display, press

AUTO SURROUND/STREAM DIRECT

.

OK?

shows in the display.

4

Press

ALC/STANDARD SURR

to confirm.

OK

appears in the display to indicate that the receiver

has been reset to the factory default settings.

Important

If the Control with HDMI function is set to ON, the HDMI

function’s Standby Through is set to anything other than
OFF

, or the Network Standby is set to ON, you may not be

able to reset the unit. In this case, reset either by turning
OFF

the Control with HDMI function, or by putting the unit

into standby mode by turning off the power of all the

connected devices, and resetting after the HDMI indicator

on the front panel turns off.

Cleaning the unit

Use a polishing cloth or dry cloth to wipe off dust and dirt.

When the surface is dirty, wipe with a soft cloth dipped in

some neutral cleanser diluted five or six times with water,

and wrung out well, and then wipe again with a dry cloth.

Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other

chemicals on or near this unit, since these will corrode the

surface.

Favorite List Full

This is displayed when you have

attempted to register a file in the

Favorites folder but the Favorites folder is

already full.

Status messages

Descriptions

Manufactured under license from Dolby Laboratories. “Dolby”,
“Pro Logic”, “Surround EX”, and the double-D symbol are
trademarks of Dolby Laboratories.

Manufactured under license from Dolby Laboratories. Dolby,
Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.

VSX-528

VSX-828

Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide patents
issued & pending. DTS-HD, the Symbol, & DTS-HD and the
Symbol together are registered trademarks & DTS-HD Master
Audio is a trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.

Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide patents
issued & pending. DTS-HD, the Symbol, & DTS-HD and the
Symbol together are registered trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.

VSX-828

VSX-528

VSX-828_SYXE8_En.book 69 ページ 2013年3月1日 金曜日 午前9時16分

This manual is related to the following products: