04 getting started, Getting started, Getting started 04 – Pioneer X-HM21-K User Manual
Page 12: Chapter 4, Setting the clock, General control, Input function, Display brightness control, Volume auto setting, Volume control
Getting started
04
12
En
Chapter 4:
Getting started
To turn the power on
Press the
1 STANDBY/ON to turn the power on.
After use:
Press the
1 STANDBY/ON to enter the power stand-by mode.
Note
• In standby mode, if iPod/iPhone/iPad is connected, the
unit turns charge mode.
Setting the clock
1
Press
1 STANDBY/ON to turn the power on.
2
Press CLOCK/TIMER on the remote control.
“CLOCK” is shown on the main display.
3
Press ENTER.
4
Press
HI to set the day, then press ENTER.
5
Press
HI to set the hour, then press
ENTER.
6
Press
HI to set the minute, then press
ENTER to confirm.
7
Press ENTER.
To confirm the time display:
Press the
CLOCK/TIMER. The time display will appear for
about 10 seconds.
To readjust the clock:
Perform “Setting the clock” from step 1.
Note
• When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.
General control
Input function
When the
INPUT on main unit is pressed, the current function
will change to different mode. Press the
INPUT repeatedly to
select desired function.
X-HM21
X-HM11
Display brightness control
Press
DIMMER to dims the display brightness. The
brightness can be controlled in four steps.
Volume auto setting
If you turn off and on the main unit with the volume set to 31
or higher, the volume starts at 30 and sets in to the last set
level.
Volume control
Turn the
VOLUME on the unit or press VOLUME +/– on the
remote control to increase or decrease the volume.
CAUTION
• The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It
is advisable to avoid exposure to high volume levels. Do
not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
Muting
The volume is muted temporarily when pressing the
MUTE on
the remote control. Press again to restore the volume.
STANDBY/ON
CD
USB
TUNER AUDIO IN
1
2
3
BT AUDIO
CLOCK/TIMER
SLEEP
EQUALIZER
OPEN/CLOSE
DISPLAY
FOLDER
MENU
PRESET
VOLUME
TUNE–
TUNE+
MEMORY
/PROGRAM
ENTER
CD
AM
USB/iPod
FM
AUDIO IN
LINE
CD
AM
USB
FM
AUDIO IN
LINE