Pioneer XW-LF3-K - Manual (Page 13)

13
En
English
Français
Español
Rear Panel
1 STANDBY/ON button
Switches the unit between Standby and on
(Press and hold 1 second) (See Turning on
the power on page 14).
2 Bluetooth Pairing button
Press to pair with a Bluetooth device (Press
and hold 1 second). Press this button again
during pairing to cancel pairing controls
(See Pairing this unit and Bluetooth device
(Initial registration) on page 15).
3 VOL –/+ button
Adjust the listening volume.
• The listening volume has a range from 0
to 15.
(However, the unit is not equipped with a
display to visually indicate the volume level).
(Default setting: 8)
4 Phone call button
Press to call or operate during a call (Press
and hold 1 second) (See Using Hands-free
calling on page 20).
5 Reset button
If the unit is not operating correctly then it
can be reset. Use something long and thin,
like a pin, to press this button.
6 AUX Jack
Connect auxiliary components (See
Listening to music on an external device on
page 21).
7 DC IN Jack
Connect to the AC adapter via bundled USB
cable.
8 Charge/Battery status indicator
The color of the indicator will change.
When using the AC adaptor:
When using the internal lithium battery:
• A fully charged battery provides
approximately 4 hours of use at
maximum volume and approximately
7 hours at volume 10.
• The battery indicator may not provide an
accurate display of remaining battery
life.
1 2 3 4 5 6 7 8
Condition Display
Charging Slow white
flashing
Charging completed Off
Condition Display
Battery life still
remaining
Off
Low battery life Fast red flashing
LFA_En.fm 13 ページ ２０１４年６月２６日 木曜日 午後１時２６分