Buffalo Technology WLI-U2-KG125S - Manual (Page 17)

1
This dialog will open. If you are not using encryption, just click Connect to connect to
your network.
If your AP uses encryption, the correct encryption
type should already be selected automatically
in the Encryption Method drop down list. Only
change this setting if necessary.
The Encryption Key field is where the actual key
for the wireless network should be entered. Some
wireless networks allow you to enter multiple
keys; four separate fields are available for this. If
your network only uses one encryption key, then
please use the first field (#1) to enter your key.
The Register Profile option will store this
wireless network in your profiles. You will then
automatically connect to this network when
inside its range. This is recommended if you plan
on using this wireless network again.
Press the Connect button once you have entered your encryption information.
Manual Configuration - Encryption