BRK electronic 4010YR - Manual (Page 2)

Research available through the National Fire Protection Agency (NFPA) indicates that as many as one-third
of all residential smoke detectors do not work. The primary cause is due to DEAD or MISSING batteries.
This innovative smoke detector provides 10 YEARS of continuous, worry-free protection.
TECHNICAL SPECIFICATIONS:
• Alarm Circuit - 100% Solid State
• Alarm Horn - 85dB at 10ft
• Smoke Sensitivity - 1.20%/FT+/-0.68%/FT
• Battery - lithium power
• Battery Life - 10 years
• Test Switch - Electronically simulates presence
of smoke and tests all detector functions
• Detector Dimensions - 5" diameter, 2" height
• Detector Weight - 9 oz
DESCRIPTION:
10 Year Lithium Power™, Battery Operated, Ionization Smoke Detector.
Contains long-life lithium power cells designed to operate continuously
for 10 years. Detector is sealed to prevent removal of the lithium power
cells, and contains a full function Test button and a Silencer button. After
10 years of service, the unit sounds a 28 day low power signal which
notifies the occupant that the detector must be deactivated and replaced.
PRODUCT FEATURES ADVANTAGES
10 Year Lithium Power™ Cells Continuous operation for 10 years
with no battery to ever replace
Tamper-Proof Design Sealed unit prevents removal of
lithium power cells
85dB Horn Provides loud, audible warning
Test Button Electronically simulates smoke
condition, causing unit to alarm
Silencer Button Quiets detector during
unwanted alarms
28-Day Low-Power Alarm Alerts end-user to replace
the detector
Fail-Safe Mounting Assures detector is turned on
Activation Switch before mounting
Deactivation Switch Deactivates power cells before
discarding detector
UL Listed Only UL Listed smoke detector with
10 year life
10 Year Limited Warranty 10 years of continuous,
worry-free protection
SAMPLE SPECIFICATION
The smoke detector shall be powered by non-
replaceable lithium power cell source, sealed within the
detector unit and having a 10 year life. The detector
shall have a dual chamber ionization sensor with a
nominal sensitivity of 1.2% as measured in a UL smoke
box. The detector shall have an activation switch
which activates the power cells at time of installation,
and which precludes the unit from being mounted
unless activated. The unit shall provide a “low power”
alarm, at least 28 days before power is depleted, to
warn the occupant that the detector must be replaced.
A built in test switch shall electronically simulate the
presence of smoke, cause the unit to alarm, and test all
detector functions. The detector shall provide a loud,
audible 85dB alarm at 10 ft., and have a silence
button which quiets the detector when depressed. The
detector shall be capable of being surface mounted.
The detector shall meet UL standards and have a
minimum 10 year limited warranty commencing from
the date of purchase. The detector shall be a BRK
Electronics Cat. No. 4010YR or pre-approved equal.
MANUFACTURED BY: DISTRIBUTED BY: FOR TECHNICAL HELP OR REPRESENTATIVE
NEAREST YOU PHONE 1-800-323-9005
CM974
Cat. No.
4010 YR
10 Year Lithium Power ™ Battery Operated,
Ionization Smoke Detector
BRK ® Electronics
3901 Liberty Street Road
Aurora, IL 60504-8122
©1996 BRK Brands, Inc.
Made in USA