BenQ Joybee 200 - Manual (Page 46)

40
Upgrading the firmware
Follow these steps to upgrade the firmware of the
Joybee 200:
1. Turn on the Joybee 200
2. Press the MODE button repeatedly to switch to
SETUP mode.
3. Use the or keys to select
the Sys Upgrade option.
4. Press to confirm your
selection.
5. You will be prompted to connect the Joybee 200 to
your PC using the USB cable. Press any key to exit
this function. When connected to the PC, the screen
displays a Ready to Upgrade message.
6. The Add New Hardware Wizard appears on the
screen of your PC. Browse to select the files required
for upgrade in the update directory in the BENQ
folder on the disk drive where you installed the
Joybee 200 Digital Audio Player software. Follow the
instructions of the wizard to complete the installa-
tion process.
SETUP
Sys Upgrade
System Info