BenQ Joybee 200 - Manual (Page 39)

33
Setting up a timer recording
The Joybee 200 can be programmed to start recording
automatically at a specified time, from a specified input
source.
To set up a timer recording, do the following:
1. Turn on the Joybee 200.
2. Press the MODE button repeatedly to switch to
SETUP mode.
3. Use the or keys to select
the REC Program option.
4. Press to confirm your
selection.
5. Use the or keys to select
On to enable the timer record-
ing.
6. Press to confirm your
selection.
7. Use the or keys to select
the input source for the
recording. Choose from Mic,
Line, and Radio.
8. Press to confirm your
selection.
9. Use the or keys to set
the date and time when the
recording starts. Set the date
(year, month, date) and the
time (hours and minutes) using
the or keys and press after each option
to move to the next.
SETUP
REC Program
Power Save
SETUP
Off
On
SETUP
Mic Input :
SETUP
12 From
2004 / 05 / 26
: 08