Belkin BUS STATION F5U100-SLV - Manual (Page 10)

Instructions for removing modules from the BusStation ™
Note: Modules should be removed from top to bottom.
Do not remove the middle modules first, doing so will
cause severe damage to your equipment and/or the
BusStation
™ .
1. Hold the BusStation ™ away from you so that the connectors are
facing you. (See Figure 7).
2. Using both of your thumbs, push the BusStation ™ module out
of the BusStation ™ bay. (See Figure 7)
3. The module should slide out smoothly.
Removing Modules
Figure 7
Modules should ONLY
be removed from
TOP TO BOTTOM
10