Olympus UFL3 - Manual (Page 33)

EN 32
EN
Troubleshooting
Q: What is the recommended white balance setting for the
camera when using the electronic flash?
A: The auto white balance mode is recommended. If you use the
manual white balance mode, set the color temperature to around
5400K. Note that the color temperature varies depending on the
flash intensity.
Q: The flash wasn’t emitted when shooting in RC mode. What is
wrong?
A: Verify that the camera and the electronic flash are set to the same
channel and that the group is set correctly.
Q: How can I find out if my camera is compatible with wireless
flash?
A: You can use the RC mode only with cameras compatible with the
Olympus wireless RC flash system. With other cameras you may
be able to use the electronic flash as slave flash if the camera’s
built-in flash can be set to slave flash mode or manual flash mode.
For details, refer to the camera’s instruction manual.
Q: Why did the electronic flash automatically turn off?
A: The electronic flash automatically turns off when no operations are
performed for 30 minutes. Turn it on again.
UFL-3_EN.book Page 32 Thursday, July 17, 2014 5:21 PM