Olympus UFL-1 - Manual (Page 19)

EN 19
EN
4. Mounting the Flash
Attaching the commercially sold arm
Attach the flash to the commercially sold arm. When attaching the arm to
the camera, make sure to read the arm’s instruction manual on how to
attach the arm.
1 Loosen the arm mount knob by turning in an counterclockwise direction.
2 Place part A in the space between the arm mount.
3 Turn the loosened knob, in step 1, in a clockwise direction all the way to
clamp the arm to the flash.
• Be sure to double check the arm is firmly fastened to the flash.
Example of attaching the arm to underwater case (PT-037)
In the case of necessity, tie the flash leash to the arm mount knob and
attach it to the underwater case etc.
1
A
2 3
UFL-1_EN.book Page 19 Tuesday, February 20, 2007 6:09 PM