Olympus WS-811 - Manual (Page 32)

2
32
EN
Recording
R
e
cording
Changing the recording scene
[ Rec Scene ]
You can easily change the recording settings
by selecting the scene which best matches
your usage (
☞ P.59).
1 While the recorder is in stop
mode, press and hold the
SCENE / INDEX button.
2 Press the + or − button to select
[ Rec Scene ].
3 Press the
` OK button.
4 Press the + or − button to select
the recording environment.
5 Press the
` OK button.
+ − button
` OK button
SCENE/INDEX
button
Listening while audio is recorded
If you start recording after inserting the
earphones into the EAR jack on the recorder,
you can hear the audio being recorded. The
recording monitor volume can be adjusted
by pressing the + or − button.
Connect the earphones to the EAR
jack on the recorder.
• After recording has started, you can hear
the audio being recorded through the
earphones.
Notes
• You cannot control the recording level
using the volume button.
• To avoid hurting your ears, turn down the
volume before inserting the earphones
into your ears.
• Do not place earphones near a
microphone as this may cause feedback.
• If an external speaker is connected
while recording, there is a risk that audio
feedback will occur.
To EAR jack