Belkin AC1800 - Manual (Page 36)

A
B
34
GETTING TO KNOW YOUR ROUTER
a) router status light
Your Router’s status is shown by the light on the front.
off: The Router is not plugged into a power source.
blinking blue: The Router is starting up.
solid blue: The Router is connected to the Internet.
blinking amber: The Router can’t detect the modem. Either the
modem is off, is not plugged into the Router, or is unresponsive.
b) Wi-Fi protected setup (Wps) light and button
The WPS button on the front of your Router can be used
to help establish a secure connection between your
Router and other WPS-enabled Wi-Fi devices such
as computers. To use WPS, refer to page 10.
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.
off: Idle
blinking blue: The Router is listening for a WPS-
enabled computer or other device.
solid blue: The Router has made a secure
connection with the computer or other device.
amber: A connection was not created.
Front panel