Olympus PTEP12 - Manual (Page 9)

EN 8
EN
Using the accesories
Installing and removing of the monitor hood
Installation
Fit the monitor hood as shown in the figure into the rails above and below the monitor window one after
the other.
Removal
Remove the monitor hood from the rails above and below the monitor window one after the other by
widening the monitor hood.
Mounting and removing the body cap
Fit the body cap onto the lens ring as shown in the figure.
Be sure to remove the body cap before shooting.
Rails
Installation Removal
PT-EP12_EN.Book Page 8 Thursday, June 5, 2014 7:14 PM