Belkin F5U122-PC - Manual (Page 14)

Specifying TCP/IP Parameters (continued)
1 3
To access and change the networking properties
in Windows ® M e
1. Select "My Computer" / "Control Panel". If you do not
see the "Network" icon in the window, click "view all
Control Panel options" (located on the right side of the
window).
2. Select "Network" by double-clicking on the "Network"
icon.
3. The Network Configuration window appears. In this
window, the USB Ethernet Adapter icon should be
visible.
4. To configure TCP/IP settings, select "TCP/IP -> Belkin
USB Ethernet Adapter" and click "Properties". To
specify an IP address select "Specify an IP address".
Note: If you are connecting to an existing network,
please see your system administrator for this
information. If you are setting up a new
network, we recommend the
following:
Suggested IP Address = 194.168.0.X (where
"X" is greater than 0 and less than
255).
Suggested Subnet Mask = 255.255.255.0
5. Enter a valid IP Address and Subnet Mask and click
"OK".
6. Select the "Identification" tab and verify/modify the
computer name and workgroup, and click "OK".
P73631_F5U122-PC-man.qxd 4/26/01 10:14 AM Page 13