Olympus LS-10S - Manual (Page 48)

48
Menu Setting
4
4 Others (Continued)
Fn Setting When functions are registered in the Fn button, each time the Fn button is pressed, you
can set or change the menu of registered function.
Setting:
[Off]: No functions will be allocated to the button.
[Index] (
☞ P.35) [Rec Mode] ( ☞ P.43)
[Rec Level]: ( ☞ P.43) [Play Mode] ( ☞ P.45)
[Reverb] ( ☞ P.45) [MemorySelect] ( ☞ P.46)
[Property] ( ☞ P.49) [Light] ( ☞ P.46)
To call up a registered function:
When the Fn button is pressed, menu setting display of registered function
will appear:
[Rec Mode]:
[PCM] [MP3] [WMA]: The recording rate can be configured
for each file format.
[Rec Level]: [Manual] [Auto]: You can configure whether to adjust the
recording level automatically or to adjust it manually. When
the [Rec Level] is set to [Manual] you can configure the limiter
function.
[Play Mode]: [ File] [ File Repeat] [ Folder] [ Folder Repeat] [All]
[All Repeat]
[Reverb]: [Normal] [Studio] [Club] [Hall] [Dome]
[MemorySelect]: [Built-in Memory] [SD card]
[Property]:
File and folder information can be confirmed from the menu
screen.
Each time the Fn button is pressed, the setting of registered function is changed:
[Light]:
[On] [Off]: Select backlight on or off by pressing the Fn
button.
If the Fn button is pressed during recording or playback, the registered function
is performed:
[Index]:
With each press of the Fn button, an index mark or temp
mark is added.
• When the registered function is [Rec Mode], [MemorySelect], or [Property], these
will not function if the Fn button is pressed during recording or playback. While the
recorder is during stop mode, press the Fn button.
Menu Setting Method