Olympus DS-7000 - Manual (Page 29)

2
29
EN
Eras
in
g
4
Erasing
4 Press the ERASE button to confirm the
erasure.
• The display changes to [ Partial erasing ! ] and
erasing will start.
• When [ Partial erase completed. ] appears on
the display, partial erase is complete.
Notes
• If the ERASE button is not pressed within 8 seconds after the [ Start point ]
and [ End point ] are alternately displayed, the recorder will revert to stop
status.
• An erased file cannot be restored.
• The erasing process may take up to 10 seconds. Do not interrupt this
process or data may be damaged.
• Files cannot be partial erased in the following cases.
- Files are locked ( ☞ P.37).
- Partial erasing is not possible on part of files with a Verbal comment on
them ( ☞ P.33).
- Files are inside a locked SD card.