Before you begin, Loading the batteries – Olympus IS-1 User Manual

Page 6

Loading the batteries

*Be sure the power switch is OFF.

*Turn the lock screw on the bottom of camera

counter clockwise to open the battery cover.

NOTE: If the batteries are replayced while the power

switch is ON, the camera may not resume

standard shooting mode. In such a case,
perform the reset operation (see p. 12).

*Insert two 3V lithium batteries as shown and

replace the cover turning the lock screw

clockwise.

WARNING: Do not mix different types of batteries

or new and old batteries at the same

time.

Use Panasonic CR 123A or Duracell DL 123A, or

equivalent.

— 5 —

Before you begin...