beautypg.com

Care and storage, Printing the date/time – Olympus Stylus 150 User Manual

Page 11

background image

20

21

țDo not leave the camera in any place exposed to excessive heat,

humidity or direct sunlight — for example, in a car or on the
beach.

țDo not expose the camera to formalin or naphthalene.

țIf the camera gets wet, wipe it with a dry towel. The salt in

seawater can be especially damaging.

țDo not use organic solvents such as alcohol or paint thinner

when cleaning the camera.

țDo not leave the camera on or near a television, refrigerator or

other appliance with a magnetic field.

țDo not expose the camera to dust or sand as this could cause

serious damage.

țDo not shake the camera.

țDo not apply excessive force to the zoom lens.

țDo not expose the camera to extreme heat (over 40°C/104°F) or

to extreme cold (below –10°C/14°F). Low temperatures, even
within this range may sometimes cause deterioration in battery
performance, temporarily disabling the camera.

țAvoid leaving the camera unused for long periods of time. This

can cause mold to grow on the camera as well as other
problems. Try to press the shutter release button and check the
operation of the camera before use.

țSome airport X-ray machines can damage the film in your

camera. Try to avoid passing your camera through these
machines. Give it to the security officer for manual inspection.

țDo not touch the front surface of the flash after using it

continuously over a short period as the surface may be hot.

CARE AND STORAGE

None

Press the MODE button. As you
press it, the mode will switch in
the order shown below.

Keep the mode you want to print
displayed.

First select the date/time mode you want to print.

• The date unit uses the same power source as the camera.
• Be sure to correct the date and time after the battery is replaced.
• The date/time is imprinted in the lower right corner of the picture.
• If the date/time is superimposed on a bright color like white,

orange, yellow, etc., it may be difficult to read.

• The date/time may not be imprinted correctly on the frame(s) after

the specified final exposure of the film.

• When black-and-white film is used, the date/time may not be

printed.

Year-month-day

Month-day-year

Day-month-year

Day-hour-minute

PRINTING THE DATE/TIME

(Quartzdate models only)

2756 Q50N_EN

03.6.3, 10:13 AM

20-21