Olympus i snap - Manual (Page 9)

LOADING THE BATTERY
Use one 3V lithium battery (CR2).
1. Slide the battery compartment
cover release and open the
cover
2. Load the battery and align the
and ends correctly.
3. Slide the lens barrier switch to
turn the camera on. If the battery
check lamp starts blinking replace
the battery About 15 rolls of
film can be used with one new 3V
lithium battery (when the flash is
used on half of pictures).
Notes:
• Dispose of used batteries in the battery
recycling boxes at stores selling batteries.
• If lithium batteries are not fully discharged,
protect them against short-circuiting (e.g., by
taping the contacts) before disposal.
8