Environmental concerns – AEG S84000KMX0 User Manual

Page 20

5. Unscrew the pin of the upper hinge

and install it on the opposite side.

6. Install the door in the upper hinge.
7. Install the ventilation grille, clipping it

into place.

8. Remove the handle. Unscrew the top

handle bracket from the handle rod

(h1). Unscrew the bottom handle brack-

et from the door (h2). Unscrew the top

handle bracket from the door (h3).

9. Install the handle in the opposite side.

Re-screw the handle bracket on the

door (h4). Turn the handle bracket with

the handle and screw them to the door

(h5) and the fitted handle bracket

10. Make sure that the front board of the

door is parallel to the front board of

the top.

11. Reposition, level the appliance, wait for at least four hours and then connect it to

the power socket.

Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the gasket.

ENVIRONMENTAL CONCERNS

The symbol on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it should be taken to the appropriate collection

point for the recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed information about recycling of this

Environmental concerns