AEG SCN91800C1 - Manual (Page 18)

Ha
K
8 mm
Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of
the door where the nail must be fitted
(K).
Hb
Place the small square on the guide
again and fix it with the screws sup-
plied.
Align the kitchen furniture door and
the appliance door by adjusting the
part (Hb).
Hb
Hd
Press the part (Hd) on the part (Hb).
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly
to the cabinet.
• The door opens and closes correctly.
8. NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
18 www.aeg.com