4 ventilation requirements, 5 installing the appliance – AEG SKS81240F0 User Manual
Page 17
• Loosen and remove the lower pin.
On the opposite side:
• Tighten the lower pin.
• Install the lower door.
• Tighten the middle hinge.
• Install the spacer.
• Install the upper door.
• Tighten the upper pin.
7.4 Ventilation requirements
5 cm
min.
200 cm
2
min.
200 cm
2
The airflow behind the appliance must
be sufficient.
7.5 Installing the appliance
CAUTION!
Make sure that the mains cable
can move freely.
Do the following steps:
x
x
If necessary cut the adhesive sealing
strip and apply it to the appliance as
shown in figure.
ENGLISH
17
See also other documents in the category AEG Refrigerators:
- SKZ71800F0 (24 pages)
- SKZ71800F0 (2 pages)
- SKZ71800F0 (20 pages)
- SCZ71800F0 (28 pages)
- SCZ71800F0 (2 pages)
- SCZ71800F0 (24 pages)
- SCS51800F0 (24 pages)
- SCN71800S0 (32 pages)
- SCS51800F0 (28 pages)
- SCS51800F0 (2 pages)
- SCS51800F0 (32 pages)
- SCS71800F0 (76 pages)
- SCS71800F0 (24 pages)
- SCS71800F0 (28 pages)
- SCS71800F0 (2 pages)
- SKS58240F0 (24 pages)
- SKS58240F0 (2 pages)
- S83200CMW0 (28 pages)
- S83200CMW0 (28 pages)
- S83200CMW0 (20 pages)
- S83200CMW0 (60 pages)
- S83200CMW0 (2 pages)
- S83600CMM0 (2 pages)
- S92500CNM0 (92 pages)
- S53630CSX2 (200 pages)
- S83600CMM0 (24 pages)
- S63300KDW0 (24 pages)
- S83600CSM1 (28 pages)
- SKS58200F0 (16 pages)
- SKS58200F0 (20 pages)
- SKS58200F0 (64 pages)
- SKS58800S1 (60 pages)
- SKS71200F0 (20 pages)
- SKD71800F0 (24 pages)
- SKD71800F0 (2 pages)
- AGS77200F0 (68 pages)
- SKD71800F0 (20 pages)
- SKD71800F0 (64 pages)
- SCS81800F0 (92 pages)
- SCS81800F0 (76 pages)
- SCS81800F0 (64 pages)
- SCS81800F0 (100 pages)
- SCS81800F0 (84 pages)
- S83200CMM0 (2 pages)
- S83200CMM0 (28 pages)