Brinkmann Series 4415 - Manual (Page 24)

Choose a good, cleared assembly
area and get a friend to help you put
your grill together. Lay cardboard
down to protect grill finish and
assembly area.
CAUTION: Some parts may
contain sharp edges.
Wear protective gloves
if necessary.
Step 1
Assemble bottom cart shelf and right
side cart panel assembly by using
two M6 X 50mm bolts (hand tighten
only at this point).
Step 2
Assemble bottom cart shelf and left
side cart panel assembly by using
two M6 X 50mm bolts. Tighten all
four M6 X 50mm bolts at this time.
Note: With the help of a friend, turn
the cart over. Try to minimize
the stress to the side panels.
Step 3
Attach locking casters to the bottom
of the cart. Tighten caster bolts
securely using hex nut wrench
provided in parts pack.
23
Locking Caster
Hex Nut Wrench