Belkin Pre-N - Manual (Page 22)

21 20
Configuring your Router with the Setup Wizard
21 20
Configuring your Router with the Setup Wizard
3. The Setup Wizard will start automatically for express
configuration (recommended) Click “Next” to continue.
4.
The first step is to select your country and ISP,
and click “Next”. If your country and/or ISP is not
listed, select “Other Country” or “Other ISP.”
5. Then select your connection type, PPPoE, PPPoA, or
other types. For the “PPPoE” or “PPPoA” you will see
the following screen (opposite page). Enter the required
values provided by your ISP and click “Next”.
Note: For more detailed instruction on other connection types, please refer
to the “Manually Configuring your Router” section of this User Manual.