Additional handsets and bases – BT Studio 3100 User Manual

Page 33

BT Studio 3100 – Issue 2 – Edition 2 – 25.10.07 – 8474

If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]

Up to 5 handsets can be registered and operated from the
BT Studio 3100 base.

Each handset can be registered with up to four bases.

If you buy new handsets to use with your BT Studio 3100
they will have to be registered to the base before you can
use them.

1. At the base: Press and hold

for 3 seconds until you hear

two beeps. You now have 90 seconds to register the handset.

2. At the handset: press

, scroll to

REGISTER

and

press .

3. Scroll to

REG BASE

and press

4. Enter the base number (1–4). The numbers flashing are

already in use.

5. The display will show SEARCHING...1 When the handset finds

the base signal, the SEARCHING and base identification
number is displayed.

6. The display will ask for the PIN to be entered. Enter the PIN

(the default setting: 0000) and press

to confirm. You will

hear a beep. The handset is now registered.

IMPORTANT

Before registration, make sure the

handset batteries are fully charged

and that you are close to the base.

Please note

Handsets that were supplied with

your BT Studio 3100 base are already

registered to it as HS-1, HS-2 etc.
Each additional handset you buy must

be registered with the base.

Additional handsets and bases

8474 Studio 3100 UG Iss2 [2] 25/10/07 16:38 Page 33