AEG SCN91800C1 - Manual (Page 42)

6. Loosen and remove the lower pin.
On the opposite side:
1.
Tighten the lower pin.
2. Install the lower door.
3. Tighten the middle hinge.
4. Install the spacer.
5. Install the upper door.
6. Tighten the upper pin.
Ventilation requirements
The airflow behind the appliance must be suffi-
cient.
Installing the appliance
CAUTION!
Make sure that the mains cable can move freely.
Do these steps.
1.
If necessary cut the adhesive sealing
strip and apply it to the appliance as
shown in figure.
50 mm min.
200 cm 2
min.
200 cm 2
x
x
42 Installation