Adesso WKB-4000UB - Manual

QuickGuide
English
Model: WKB-4000UB Series
INSTALLATION
1. Place batteries.
a). Open the battery cover under the keyboard and place 2 AAA
batteries inside.
4. a. Power the keyboard by switching it “ON”. The power switch is
found on the left edge of the keyboard. (By default the power of the
keyboard is switched “ ON”.)
www.adesso.com
INTRODUCTION
Work freely, with no limits of space, angles or distance. The Adesso
2.4 GHz RF Wireless Touchpad Keyboard combines the control of an
integrated touchpad with the features of a standard keyboard all
packed into a powerful compact device. With 6500 IDs on 12
channels you can enjoy 30 feet of wireless freedom. The GlidePoint
touchpad delivers superior precision and smooth motion once the
advance driver installed. It has advance functions such as forward
and back, zoom in and out, vertical and horizontal scrolling and
touchpad tapping.
FEATURES
• 2.4 GHz RF Wireless Technology
• 30 feet working range makes a 360-degree connectivity
• Built-in touchpad which eliminates use of a mouse
• Less than 12 inches in keyboard size and lightweight
• Scissor switch key with guaranteed switch key life of up to
5 million cycles
• Fully functional as a full regular keyboard
REQUIREMENTS
• Hardware: IBM, Pentium II class compatible or higher
• Operating System: Windows Vista, XP, 2000 and below
• Connection: USB
LIMITED WARRANTY
ADESSO provides one year limited warranty for the quality of all its products in materials and
workmanship.
During this period, ADESSO will repair or replace all merchandise, which proved to be
defective. However, ADESSO will not warranty any product which has been subjected to
improper freight Handling, shipping abuse, neglect or unauthorized repair or installation. The
warranty also will not cover products installed with Non-ADESSO components and product
with broken sealed and assembly trace. After replacement of RMA, ADESSO reserves the
right to request the total cost of the replacement products with broken seals or assembly
trace.
If you discover a defect, Adesso will, at its option, repair or replace the product at no charge
to you, provided you return it during the warranty period with transportation charges pre-paid
to Adesso. You must contact Adesso at [email protected] for a Return Merchandise
Authorization number (RMA) prior to returning any product. For each product returned for
warranty service, please include your name, shipping address (no P.O. Box), telephone
number, copy of the bill of sale as proof of purchase and have the package clearly marked
with your RMA number.
SUPPORT
We have listed most of our FAQ’s (Frequently Asked Questions) at:
http://www.adesso.com/faqs.asp. Please visit our FAQ Service & Support pages before you
contact our E-mail or Telephone Support.
Email Support: If our FAQ’s do not help you resolve your issues, please email
[email protected]
Telephone Support:
Toll Free: (800) 795-6788
9:00AM to 5:00PM PST Monday - Friday 1 2 3
6 5 4
NOTE:
• RF Signal LED on the receiver will flash when the keyboard is being used.
• When the Battery Low LED is ON, it means the keyboard requires to
change the batteries.
• The keyboard goes to sleep mode after 5 mins of inactivity but we
suggest to turn “OFF” the keyboard when leaving your desk for more
than an hour to save battery life for longer lasting use.
TROUBLESHOOTING
If you cannot get your keyboard to work after installation, please try the
following:
1. Make sure you have connected the receiver correctly to the computer.
The receiver has been properly plugged onto computer's USB ports.
2. Make sure you have inserted two AAA batteries inside the battery
compartment correctly. Move the keyboard closer to the receiver.
3. Wireless phone, routers and other devices that uses 2.4GHz frequency,
might cause interference with your keyboard.
8 7 9
Wireless Mini Touchpad Keyboard
ON/OFF
Switch
WKB-4000UB V1.3 062509
b.Press the “ CONNECT” button for 1 second then release.
Connection will be successful once the LED light of the receiver
will stop blinking.
b). Close the battery compartment cover.
AAA Batteries AAA Batteries
+ -
Connect
Button
2. Turn ON your computer and let Windows load completely.
Power ON
3. Plug the USB Wireless Receiver of the keyboard into the USB port
of your computer. The receiver will be blinking after it is detected by
your system.
USB Port
USB Wireless
Receiver
NOTE:
A Windows dialog box New Found Hardware will appear and the
system will install the driver automatically and complete the
installation.
Power ON/OFF Switch
DESCRIPTION
Installation Label
a b
Belly Label
Battery Compartment Receiver Holder
Connect Button
Safety Label