AEG SDS51200S0 - Manual (Page 37)

6. Loosen and remove the lower pin.
On the opposite side:
1. Tighten the lower pin.
2. Install the lower door.
3. Tighten the middle hinge.
4. Install the spacer.
5. Install the upper door.
6. Tighten the upper pin.
Ventilation requirements
The airflow behind the appliance must be suffi-
cient.
Installing the appliance
CAUTION!
Make sure that the mains cable can move freely.
Do these steps.
1.
Apply the adhesive sealing strip to the
appliance as shown in figure.
50 mm min.
200 cm 2
min.
200 cm 2
Installation 37