Filter, Additional features, Change – AEG EWA7800 User Manual

Page 18

5. The display will show “Change

Filter” after 60 brew cycles, to
let the user know that the PureAd-
vantage™ water filter needs to be
replaced.

Place the filter into a container of

clean cool water, and let soak for 10
minutes.

6. Place the PureAdvantage™ water

filter (filter end first) into the pocket
located at the bottom of the water
reservoir.

Additional features

4. The Aroma Selector extends the

brewing time to maximize the fla-
vour extraction and get a stronger
coffee for a small number of cups
(normally less than 6). Press the
Aroma button to adjust the aroma
setting.

3. Brewing coffee with the program

time setting: Press and hold the
Auto/Start button until the display
shows the time and the program
time indicator. Set the time by using

the ( ) or ( ) button, press the Set

button to confirm.

Press the Auto/Start button to start

or pause the program time setting.

CHANGE

FILTER

KEEP WARM

1
4

2. Adjusting the keep warm tem-

perature (for the Coffee maker

with Glass jug only): Press the
Option button. Choose the desired
temperature (High/Medium/Low)
by pressing the ( ) or ( ) button.
Press the Set button to confirm.

1. Adjusting the clock:
Press and hold the Set button until

the time (hours) on the display starts
flashing. Press the Scroll up ( ) or

Scroll down ( ) button to change

hours, then press the Set button to

confirm. Set minutes (and AM or PM)

by using the ( ) or ( ) button, press

the Set button to confirm.

Note: If no button is pressed the appli-

ance will automatically close the clock

setting interface after 5 seconds.

This manual is related to the following products:

KF7500