Door reversibility, Ventilation requirements, Installing the appliance – AEG SKS51240F0 User Manual
Page 76
Door reversibility
The door of the appliance opens to the right. If you want to open the door to the left,
follow these steps before you install the appliance:
1. Loosen and remove the upper pin.
2. Remove the door.
3. Remove the spacer.
4. With a key, loosen the lower pin.
On the opposite side:
1. Tighten the lower pin.
2. Install the spacer.
3. Install the door.
4. Tighten the upper pin.
Ventilation requirements
The airflow behind the appliance must be suffi-
cient.
Installing the appliance
CAUTION!
Make sure that the mains cable can move freely.
50 mm min.
200 cm
2
min.
200 cm
2
76
Installation
See also other documents in the category AEG Refrigerators:
- SKZ71800F0 (24 pages)
- SKZ71800F0 (2 pages)
- SKZ71800F0 (20 pages)
- SCZ71800F0 (28 pages)
- SCZ71800F0 (2 pages)
- SCZ71800F0 (24 pages)
- SCS51800F0 (24 pages)
- SCN71800S0 (32 pages)
- SCS51800F0 (28 pages)
- SCS51800F0 (2 pages)
- SCS51800F0 (32 pages)
- SCS71800F0 (76 pages)
- SCS71800F0 (24 pages)
- SCS71800F0 (28 pages)
- SCS71800F0 (2 pages)
- SKS58240F0 (24 pages)
- SKS58240F0 (2 pages)
- S83200CMW0 (28 pages)
- S83200CMW0 (28 pages)
- S83200CMW0 (20 pages)
- S83200CMW0 (60 pages)
- S83200CMW0 (2 pages)
- S83600CMM0 (2 pages)
- S92500CNM0 (92 pages)
- S53630CSX2 (200 pages)
- S83600CMM0 (24 pages)
- S63300KDW0 (24 pages)
- S83600CSM1 (28 pages)
- SKS58200F0 (16 pages)
- SKS58200F0 (20 pages)
- SKS58200F0 (64 pages)
- SKS58800S1 (60 pages)
- SKS71200F0 (20 pages)
- SKD71800F0 (24 pages)
- SKD71800F0 (2 pages)
- AGS77200F0 (68 pages)
- SKD71800F0 (20 pages)
- SKD71800F0 (64 pages)
- SCS81800F0 (92 pages)
- SCS81800F0 (76 pages)
- SCS81800F0 (64 pages)
- SCS81800F0 (100 pages)
- SCS81800F0 (84 pages)
- S83200CMM0 (2 pages)
- S83200CMM0 (28 pages)