AEG KRC 4350 BT - Manual (Page 37)

English
37
Switching the Device on/off (3)
Switch the device to the standby mode with the POWER
button (the date display will appear). If this button is pressed
once more, the device switches on again.
NOTE:
After about 10 minutes, the device will automatically switch
to standby.
TUNE+/TUNE- control (11)
The TUNE control is used for different settings.
NOTE:
The TUNE control is a push switch. Turn the push switch
until a “click” can be heard. Hold it down in the respec-
tive direction of rotation until the desired setting has been
made.
Setting of the Clock (in Standby Mode)
• You make adjustments using the TUNE+/TUNE- control
(11).
• Always confirm your settings with the PRESET button (10).
NOTE: Changing the display format
You may optionally also use the 12-hour display for the
time display. If you want to use this display format, we
recommend that you set the time in the afternoon. With
the 12-hour display, “PM” will appear in the display for the
afternoon.
1. Turn the TUNE regulator in direction TUNE+.
1. Press the PRESET button (10). You may now perform the
settings in turn for the minutes and the hours.
Setting the date (in standby mode)
• You make adjustments using the TUNE+/TUNE- control
(11).
• Always confirm your settings with the PRESET button (10).
1. Select the date display by pushing the MODE button (4).
The year display shows in the year indicator (YEAR).
2. Press the PRESET button (10). You can now consecu-
tively adjust the settings for the date (DATE), the month
(MONTH), and the year (YEAR). The setting for the
weekdays changes automatically.
MO = Monday, TU = Tuesday, WD = Wednesday,
TH = Thursday, FR = Friday,
SA = Saturday, SU = Sunday
Changing the display indicator
You can switch between the different displays with the MODE
button (4).
Headphone jack (13)
For headphone operation, use a headphone set with a
3.5 mm stereo jack plug plugged into the headphone jack.
The speakers are switched off.
Volume adjusting
The desired volume can be sent using the VOLUME regula-
tor (1).
Display brightness
The backlight of the display will automatically turn off be-
tween 11pm and 5 am.
Listening to the radio
Scanning stations
• Tune into the desired station with the TUNE+/TUNE- con-
trol (11). If you keep the control pressed in one direction,
then the device will search to the next, or previous radio
station. The display will show the respective frequency.
• If there is interference on the received station, try to
improve the reception by rotating, winding or unwinding
the wire antenna.
Presetting radio stations
The device can preset up to 30 radio stations. To preset a
station, follow the steps below:
1. Search for a station as described in “Scanning stations”.
2. Press the PRESET button (10). The display will show
MEMORY and the respective preset location will begin to
flash.
3. Use the AL+/M+ (9) and AL-/M- (8) buttons to choose the
preset location for the corresponding station.
4. Press the PRESET button again. The station will be pre-
set. The MEMORY indicator and the preset location will
disappear.
Recalling preset radio stations
1. Choose the preset location with the AL+/M+ (9) and
AL-/M- (8) buttons.
Automatic station scan
When holding down the PRESET button (10) for approx.
3 seconds, the device will start the automatic station scan
searching the entire frequency range automatically for
stations. The stations found will be stored on the preset loca-
tions 1-30 in ascending order.
NOTE:
• The scan will only stop after all 30 preset locations have
been filled.
• The order cannot be changed once set.