AEG KH 4225 BT schwarz - Manual (Page 23)

English
23
If the registration was done successfully, a short beep
sound will be heard from the headphones. The blue light
will rapidly flash twice. Then the blue light flashes twice
every 5 seconds. If possible, adjust the volume of the
player to a suitable listening volume.
NOTE:
• Depending on the device manufacturer, you need
to perform the registration (PAIRING) again to con-
nect the devices.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in
the future.
• To ensure an optimal connection, make sure that
the battery of your player is completely charged.
• Some of the mobile phone brands have an energy-
saving mode. Deactivate the energy-saving mode
as it can otherwise result in problems during the
data transfer through Bluetooth.
• To be able to transfer audio data, Bluetooth needs
to stay activated in your player. Observe the opera-
tion manual of your player.
• If there is no Bluetooth connection, the red light will
flash every 3 seconds.
Operation
The device is equipped with multi functional buttons. For
different functions press the respective button briefly or press
and hold.
On/Off
• Press and hold the button approx. 5 seconds to turn the
player on. A beep sound will be heard from the speaker
and the light (1) will flash blue.
NOTE: Automatic connection
If supported by your player (e.g. mobile phone), the de-
vices will be connected automatically. The prerequisite
for this is:
• The devices were already connected with each
other.
• Bluetooth is activated in your player.
• Press and hold the button again approx. 5 seconds to
turn the player off. The devices are separated. The light
will quickly flash red and will then go out.
NOTE:
Turn off the headphones when you are not using them
to conserve the battery.
Replay/Pause
• Press the multifunction button in order to interrupt the
playback.
• Press the multifunction button again in order to continue
the playback.
NOTE:
Depending on the device manufacturers, models, and
software versions you need to start the music playback in
your player.
Adjust Volume
Keep the button pressed in the “
+” or “-” direction in order
to adjust the volume. Release the button if you have set the
desired volume.
WARNING:
Listening to music at high volume can damage your hear-
ing.
NOTE:
If the maximum volume on the headphones has been
reached, a beeping sound will be heard.
Select Music
• Press the
> button in order to select the next track.
• If you press the < button, the current track will be played
from the beginning. Press the < button twice to select the
previous track.
NOTE:
Your player must support this function.
Accept/terminate a conversation
• Push the button to accept an incoming call.
• To end the conversation, push the button one more time.
NOTE:
During an incoming telephone call, the music playback will
stop. After terminating the conversation, the music piece
will continue to be played back.
Number redial
You would like to call the last dialed number again?
• Press the button until you hear a beep.
• If you now release the button, the previously dialed num-
ber will be dialed.
Cleaning and storage
CAUTION:
Do not immerse the headphones in water!
• There are no parts inside the device which can be main-
tained by the user.
• Clean the headphones with a slightly damp cloth and no
additional cleaning agents.