AEG SKS98840F1 - Manual (Page 63)

Problem Possible cause Solution
The temperature in
the appliance is too
low. The temperature regula-
tor is not set correctly. Set a higher temperature.
The temperature in
the appliance is too
high. The temperature regula-
tor is not set correctly. Set a lower temperature.
The door is not closed
correctly. Refer to "Closing the
door".
The product temperature
is too high. Let the product tempera-
ture decrease to room
temperature before stor-
age.
Many products are stored
at the same time. Store less products at the
same time.
The temperature in
the refrigerator is
too high. There is no cold air circu-
lation in the appliance. Make sure that there is
cold air circulation in the
appliance.
The temperature in
the freezer is too
high. Products are too near to
each other. Store products so that
there is cold air circulation.
There is too much
frost. Food is not wrapped cor-
rectly. Wrap the food correctly.
The door is not closed
correctly. Refer to "Closing the
door".
The temperature regula-
tor is not set correctly. Set a higher temperature.
DEMO appears on
the display The appliance is in dem-
onstration mode. (dEMo) Keep the OK button press-
ed for approximately 10
second until a long sound
of buzzer is heard and the
display shuts off for a short
time; the appliance starts
working regularly
7.1 Warning signal
The warning signals of the control and
signalling system of the appliance are
displayed on the Visual Display.
The system will give out a signal if:
• An error has occurred in the operation
of the appliance. In case the electronic
system of the appliance cannot identi-
fy the real temperature a sign will ap-
pear on the temperature display.
• Until the staff of the customer service
arrive at the spot and solve the prob-
lem, the appliance will continue oper-
ating with the help of a spare pro-
gram.
ENGLISH
63