AEG Voxtel M400 - Manual (Page 31)

31 30
UK
• Call Time Reminder: You can select off, single or periodic.
• Auto quick end: You can set off or on, the time limit is 1-9999
14.3.7 LCD backlight
Press * # to adjust the LCD brightness, and to adjust LCD time (1-60
seconds).
14.4 Network settings
• Network selection: You can select New search, Select network and
Selection mode.
• Preferences: You can select the network you will preference.
14.5 Security settings
14.5.1 SIM1 lock
Set SIM lock to on or off need enter PIN code.
• On: To activate the PIN, the phone request the code each time the
phone is switched on.
• Off: To switch off the PIN.
>If you input the wrong PIN code for thrice that the phone will request
to input the PUK code. If the PUK code is not provided, please contact
your network operator.
• Change Password: You can change the SIM PIN code.
14.5.2 Phone lock
If you set on that the phone will request the password each time the phone
is switched on. The default is off. Set on or off need enter password. The
factory setting for the lock code is 0000
On: Select on, the phone will request the password each time the phone
is switched on.
Off: Select off, the phone will not request the password each time the
phone is switched on.
14.5.3 Change password
You can change the phone lock password. and mobile tracker password
14.6 Restore Factory Settings
• You can select OK to restore the settings.
>The phone will request to input the password. The factory setting for
the lock code is 0000