AEG Voxtel M400 - Manual (Page 21)

21 20
UK
10.8.2 Read message
You can read current broadcast message thought “Read Message” In the
read interface, select delete to delete the current message.
10.8.3 Languages
All Languages allow you to receive broadcast messages in every possible
language.
10.8.4 Channel setting
Select the “Channel Setting”, can add broadcast channel and set
channel title and channel ID; can select on/off operation to preparing
broadcast channel, filtrate needless broadcast channel; can select edit to
reinstall current channel; can select delete to delete broadcast channel
of preparing.
10.9 Templates
View the 10 SMS templates.
• Click option to Use, Edit and Remove.
10.10 SMS settings
When using the short message function you must first make the necessary
settings.
• Enter the “Message Settings” submenu to select operate as follows:
10.10.1 Profile setting
Please contact your network provider to get the SC address. Profile list
have one profile, two profiles and four profiles because the different
network supports and SIM card.
• Select one Profile (Profile1/2/3/4), press the menu key can set the profile
name, SC address, valid period and message type.
During Valid Period, the short message service centre will continuously
resend a message until it is received. The message Valid Period is
applicable for all sent messages. You can set the message Valid Period
as any of the following: “1 hour”, “6 hours”, “12 hours”, “1 day”, “3
days”,“1 Week” or “Maximum” The network operators must support
this function for it to be available. by the * key or # key to select one
of them, then presses the C key to prompt whether “the storage”,
presses the menu key preservation, presses the C key not to preserve the
establishment.