AEG Voxtel roam - Manual (Page 5)

5
UK
5.2 Headset LED indicators
Meaning
Purple
tSteadily on: the wireless headset is unregistered.
tFlashing: the wireless headset is registered but the
base is not available (searching or out of range).
Blue
tSteadily on: when the headset is seated in the base
and fully charged. Once the headset is successfully
registered, the blue light will flash on then off, for
about three seconds at a time and emit a long beep.
tLong flashing: the wireless headset is in idle mode
and off the base.
tDouble flashing: the wireless headset is on and if
the signal becomes weak, three short beeps will be
heard.
tContinuously flashing: the wireless headset is ringing
and can be heard through the earpiece.
Red
tSteadily on: when the wireless headset is charging
on the base.
tLong flashing: indicates that the battery is low, the
unit is not on the base. The headset will emit short
double beeps.
tDouble flashing: indicates that the battery is low
while the headset is in use and short double beeps
will be emitted.
tTriple flashing: indicates powering on/off the headset
and three short beeps will be emitted through the
earpiece.
Red/blue
tToggling display: the wireless headset is in
registration mode. When the headset is registered
successfully, the headset will beep for around 2
seconds.