AEG Boomerang - Manual (Page 6)

5.3 Base Unit (See P3)
# Icon Meaning
12 Lights up in Red when a handset is on the base to indicate it is charging.
13
Press to find/page all registered handsets. Press the button again, or any key on the handset
to turn off the page signal. Press and hold to start registration process.
5.4 Text and Number Entry
You can select different characters by using repeated presses of the alphanumeric keypad. This will be
helpful when storing a name in the phonebook or renaming your handset. The characters are printed on
the keys.
For example, to enter the name Tom:
T Press 8 once
O Press 6 three times
M Press 6 once
In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered.
Writing Tips:
• Once a character is selected, the cursor will move to the next position after a short pause.
• Press
to delete the last letter or number.
6 USING YOUR PHONE
6.1 Make a Call
6.1.1 Pre-dialling
• Enter the phone number (maximum 24 digits). If you make a mistake, press to delete the last
entered number.
• Press to dial the phone number.
6.1.2 Direct Dialling
• Press on your Handset.
• Dial the number.
6.1.3 Call from the Redial List
• Press in standby mode.
>The last number dialled is displayed.
• Press to select the desired entry in the redial list and then press to dial out the selected redial
number.
6.1.4 Call from the Call Log
• Press in standby mode.
• Press to select the desired entry in the call log and then press to dial out the selected call log
number.