Noises – AEG SCS71800F0 User Manual

Page 23

13. Remove the brackets and mark a dis-

tance of 8 mm from the outer edge of

the door where the nail must be fitted

(K).

14. Place the small square on the guide

again and fix it with the screws sup-

plied.
Align the kitchen furniture door and the

appliance door by adjusting the part Hb.

15. Press the part (Hd) on the part (Hb).

Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to the

cabinet.

• The door opens and closes correctly.

NOISES

There are some sounds during normal running (compressor, refrigerant circulation).

8 mm

Noises