AEG F99015VI0P - Manual (Page 8)

Programme
1) Duration
(min) Energy
(kWh) Water
(l)
6 50 - 60 1.0 - 1.1 10 - 11
7 70 - 80 0.8 - 0.9 11 - 12
8 14 0.1 4
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
[email protected]
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
Activate or deactivate the op-
tions before the start of a pro-
gramme. You cannot activate or
deactivate the options while a
programme operates.
If one or more options are set,
make sure that the related indi-
cators are on before the pro-
gramme starts.
5.1 Multitab
Activate this option only when you use
the combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press Multitab, the related indicator
comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the wa-
ter hardness in your area.
5. Adjust the released quantity of rinse
aid.
5.2 ÖKO PLUS
This option decreases the temperature
in the last rinse phase.
The use of this option decreases the en-
ergy consumption (up to 25%) and the
programme duration.
The dishes can be wet at the end of the
programme.
5.3 ExtraHygiene
With this option you have better hygiene
results. During the rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.
8 www.aeg.com