beautypg.com

Replacing the lamp, Closing the door – AEG S53600CSW0 User Manual

Page 20

background image

Problem

Possible cause

Solution

The temperature in the re-

frigerator is too high.

There is no cold air circulation in

the appliance.

Make sure that there is cold air

circulation in the appliance.

The temperature in the

freezer is too high.

Products are too near to each

other.

Store products so that there is

cold air circulation.

There is too much frost.

Food is not wrapped correctly.

Wrap the food correctly.

The door is not closed correctly.

Refer to "Closing the door".

The temperature regulator is not

set correctly.

Set a higher temperature.

Technical problems

electrical malfunction

Contact Customer Service De-

partment

Replacing the lamp

CAUTION!

Disconnect the plug from the mains socket.

1. Press on the rear hook of the lamp cover by a

screwdriver and at the same time pull and ro-

tate the cover in the direction of the arrow.

2. Replace the lamp with one of the same power

and specifically designed for household appli-

ances. (the maximum power is shown on the

light bulb cover).

3. Install the lamp cover by fixing it into its orig-

inal position.

4. Connect the plug to the mains socket.
5. Open the door. Make sure that the light comes on.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.

1

2

20

What to do if…