AEG HK614010BB - Manual (Page 24)

• To change the Count Down Timer:
set the cooking zone with . Touch
or .
• To deactivate the timer: set the
cooking zone with . Touch . The
remaining time counts back to
00
.
The indicator of the cooking zone
goes out. To deactivate you can also
touch
and at the same time.
When the countdown comes to an
end, the sound operates and
00
flash-
es. The cooking zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) :
touch
again and again until the in-
dicator of a necessary cooking zone
comes on.
• To activate the CountUp Timer:
touch of the timer comes on.
When the indicator of the cooking
zone starts to flash slow, the time
counts up. The display switches be-
tween
and counted time (minutes).
• To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows the time that the cooking zone
operates.
• To deactivate the CountUp Timer:
set the cooking zone with and
touch or to deactivate the tim-
er. The indicator of the cooking zone
goes out.
Minute Minder
You can use the timer as a Minute Mind-
er while the cooking zones do not oper-
ate. Touch
. Touch or of the
timer to set the time. When the time
comes to an end, the sound operates
and
00
flashes.
• To stop the sound: touch
4.7 STOP+GO
The function sets all cooking zones
that operate to the lowest heat setting (
).
When operates, you cannot change
the heat setting.
The
function does not stop the timer
function.
• To activate this function touch
.
The symbol comes on.
• To deactivate this function touch
.
The heat setting that you set before
comes on.
4.8 Lock
When the cooking zones operate, you
can lock the control panel, but not
. It
prevents an accidental change of the
heat setting.
First set the heat setting.
To start this function touch
. The sym-
bol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat
setting that you set before comes on.
When you stop the appliance, you also
stop this function.
4.9 The Child Safety Device
This function prevents an accidental op-
eration of the appliance.
To activate The Child Safety Device
• Activate the appliance with . Do
not set the heat settings.
• Touch for 4 seconds. The symbol
comes on.
• Deactivate the appliance with .
To deactivate The Child Safety Device
• Activate the appliance with . Do
not set the heat settings. Touch
for 4 seconds. The symbol
comes
on.
• Deactivate the appliance with .
To override The Child Safety Device
for only one cooking time
• Activate the appliance with . The
symbol comes on.
24 www.aeg.com