AEG SKZ71800F0 - Manual (Page 14)

2. Connect the wire coloured blue to
the terminal either marked with the
letter “N“ or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
“L“ or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
4
is secure over the outer sheath.
5. Make sure the electricity supply volt-
age is the same as that indicated on
the appliance rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp
plug fitted
2
. In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse
must be used.
WARNING!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that it is
disposed of safely.
7.3 Ventilation requirements
5 cm
min.
200 cm 2
min.
200 cm 2
The airflow behind the appliance must
be sufficient.
8. NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
BRRR !
HISSS!
CLICK!
BLUBB!
CRACK!
SSSRR
R!
OK
14 www.aeg.com