Nilfisk-ALTO MS Series - Manual (Page 6)

QUICK START
MS Passive Full-range Speakers
Stereo
Power Amplifier
speaker cable
Tripod
Mount Left
Main Mix
Output
Right
Main Mix
Output
Mixer
Tripod
Mount
speaker cable
5
3. QUICK START
Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are
turned completely down.
-. For Passive Full-range Speakers
1). Connect one side of the speaker cable to the OUTPUT CHA/CHB or Binding Post of your stereo power amplifier
and the other side to the INPUT socket of your speaker cabinet.
2) Connect the input terminal of LTO MS1 with the AUX SEND of mixer( or the similar terminal). Connect its output
terminal with the AUX RETURN of the mixer. Then select the preset as need.
3). Complete other connections as illustrated.
4). Turn on your mixer and MS1 first, then the stereo power amplifier.
5). Turn up the volume controls of your amplifier to about 70%.
6). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate
the output level.
7). After using, turn off your stereo power amplifier first, then the mixer and Ms1.