Nilfisk-ALTO MS Series - Manual (Page 13)

12
7.2 LTO MS1 TECHNICAL SPECIFICATION
AUDIO INPUT Connectors 1/4" jack
Type R filtered, servo balanced input
Impedance 30 Kohm balanced, 22 Kohm unbalanced
Max. input level +26 dBu balanced and Unbalanced
CMRR Typ.40db,>55db@1khz
AUDIO OUTPUT Connectors 1/4" jack
Typebalanced
Min. output impedance 100 Ohm
Max. output level +26 dBu balanced
SYSTEM SPECIFICATIONS Frequency response 10Hz to 30kHz, +/-1dB(FLAT)
S/N >110dB, unweighted, 22 Hz to 22kHz
THD 0.005% typ.@0 dBu, 1kHz,(unity gain), FLAT
INDICATORS Input level CLIP LED display: +7dbu
POWER SUPPLY AC ADAPTOR USA/Canada 120V~, 60Hz
U.K./Australia 240V~, 50Hz
Europe 230V~, 50Hz
Power consumption 5W
PHYSICAL Dimension 130(W) 117(D) 45(H)mm(5.1" 4.6" 1.7")
Net weigh 0.8kg
F
Band-Pass
400Watt AES Standard
800Watt Peak
124dB SPL calculated
45Hz / 200Hz at -10dB
8 Ohm / 4 Ohm
250Hz Acoustical filter
15" woofer / 3" voice coil
2 x SPK4@Power Input / Output
Multi-layer Plywood / Black painted
H600 x W485 x D600 (mm)
MS15S
Passive System Type
Continuous Power
Peak Power
Max SPL 1mt
Frequency Response
Impedance Low - High
Crossover Frequency
Low Frequency Device
Connectors
Cabinet
Dimensions H x W x D
MS18S
Band-Pass
400Watt AES Standard
800Watt Peak
124dB SPL calculated
35Hz / 200Hz at -10dB
4 Ohm / 8 Ohm
250Hz Acoustical filter
18" woofer / 3" voice coil
2 x SPK4@Power Input / Output
Multi-layer Plywood / Black painted
H730 x W600x D600 (mm)
Model Item